ATOZLT-ARTNET-DMX-2

Artnet-DMX converter - 2 Universes (1024 channels)

Bridges between an Ethernet-based lighting control network using ArtNet (or networked DMX over IP)
and standard DMX512 — allowing devices/controllers that speak ArtNet to output to classic DMX fixtures/LED controllers
(and vice versa).

You can connect the Artnet-DMX-1 to your network (via Ethernet RJ45) and to your DMX fixtures/LED drivers (via DMX output),
and the unit translates network-based ArtNet data into DMX512 data streams (or can also convert DMX512 → ArtNet if configured)

It is compatible with all the effects lighting control software which support Artnet protocol, widely used in the
LED dot matrix and the stage lighting control network

Input Signal:
ArtNet

Output Signal:
DMX512

DMX Channels:
512 x 2CH

Power Input:
12Vdc (with a power adapter)

Current:
30mA@12V

Interface:
Ethernet RJ45 for network; standard DMX output - 3-pin XLR

Network Support:
Can handle many “DMX universes” on network: up to 256 universes across network
(though each unit outputs one universe/512 channels)

Address Settings:
Configurable via DIP switches (subnet / universe addressing), status/network activity, firmware updatable via network

5 Year Warranty